The DS10
series is designed for DIN rail mounting and can be installed in the cabinet in
few seconds.
The
connection to the motor, to the logic and power signals are realized by useful
removable
Technical Data
|
Power Supply Voltage |
From 18Vdc up to 50Vdc |
|
Phase Current |
From 0.3Arms up to 1.4Arms in increments of 0.1Arms |
|
Control Mode |
Step and Direction. Start/Stop |
|
Digital Inputs |
4
optoisolated: STEP, DIRECTION, ENABLE, BOOST |
|
Step subdivision |
Microstepping. Selectable from full step to 1/128 step |
|
STEP Max Frequency |
300KHz |
|
Protections, Alarms and Diagnostics |
Over
and under voltage, thermal, Phase Motor interrupted |
|
Connections |
By functional removable terminal block. Section of cable up to AWG14 |
|
Dimensions |
100(H)
x 17.5(L) x 119(W) mm |
|
Weight |
160g |
Benefits
- Fast mounting on DIN rail
- Compact size
- Integrated oscillator
- Gate function for the control of several drives with a single STEP source
- Resolution up to 25600 steps/rev
- Damping of resonances
- Power output stage at high efficiency
- Digital I/O signal conditioning
- IP20 protection grade